ℹ️ This feature is only available to Shapr3D Pro users.
You can select from 10 types of dimensions to add to your drawing. Check out the table below to learn about each dimension type.
Dimension Type |
Description |
|
||||||
|
|
Line Length |
Measures the length of a straight line. |
|
||||
|
Point-to-Point Distance |
Measures the distance between two selected points. These points can be endpoints, intersections, quadrant points, and center marks. |
|
|||||
|
Point-to-Line Distance | Measures the distance between any point and a line. These points can be endpoints, intersections, quadrant points, and center marks. |
|
|||||
|
Line-to-Line Distance |
Measures the distance between two parallel lines. |
|
|||||
|
|
Arc Angle |
Measures the included angle of an arc. |
|
||||
|
3-Point Angle |
Measures the inner or outer angle between two virtual lines defined by one joint vertex and two other points on the legs. These points can be endpoints, intersections, quadrant points, or center marks. |
|
|||||
|
Line-to-Line Angle |
Measures the angle between two non-parallel lines. |
|
|||||
|
Radius |
Measures the distance between an arc or circle’s circumference and center. |
|
|||||
|
Diameter |
Measures the length of a line that would cross a circle or arc’s center and two points on the shape’s circumference. |
|
|||||
|
Min-Max Distance |
Measures the minimum or maximum distance between a circle or arc and another circle, arc, or line. Curves that are not part of a section of a virtual circle or arc are not included. |
|
Add dimensions to your drawing in just a few steps:
-
Select Dimensions in the drawings menu.
- Select a dimensioning tool.
- Select the items that need to be dimensioned.
- After you finish adding dimensions, select Done.
- To add a prefix text, suffix text, or size tolerances to a dimension, tap the dimension, and then select the dimension editor badge.
- Prefix Text - Enable to enter a prefix text for your dimension. For easy access, you can select any of the commonly used symbols available in the Prefix text field below.
- Tolerances - Enable to enter a size tolerance applicable to your dimension. To choose a tolerance type, select the drop-down menu and choose between Symmetrical, Deviation, Limits, and Basic.
-
Suffix Text - Enable to enter a suffix text for your dimension. For easy access, you can select any of the available commonly used symbols below the Suffix text field.
-
Optional: Drag the dimension on the sheet to reposition it anywhere you want.
-
If you want to remove a dimension, tap it and then select Delete.
💡Shortcut💡: You can directly select a line, curve, or any other item in your drawing. The app will automatically dimension the item and you can confirm it by selecting the check mark or pressing the Return key.
If you select items in a view, the menu is customized automatically. From this adaptive menu, you can select the appropriate tool to instantly dimension the selected items. If there is only one dimension possible, the dimension is automatically applied.
To specify the precise decimal measurement of Linear and Angular dimensions, select the Drawing Preferences settings icon from the top right corner then look for Dimension Precision.