Shapr3D integrates directly with Bambu Studio, so designs can be sent straight from the Export menu to your slicer without manual file transfers. Slicer (Bambu) works with the range of Bambu Lab printers, making it easy to go from model to print in just a few steps.
Before you begin
To export to Bambu Studio, make sure you have the following:
- Bambu Studio installed on your desktop.
Export to Bambu Studio
- Go to Export and select Slicer (Bambu) from the format list.
- Adjust the export settings as needed. See Slicer export settings below.
- Select Open in Bambu Studio to send the file to the Bambu Studio desktop app.
Slicer export settings
Before exporting, you can adjust the following settings:
- Resolution – Controls the mesh quality of the exported file. Choose from Low, High, or Custom.
- Include Mesh Bodies – When on, mesh bodies in your design are included in the export. On by default.
- Include Hidden Items – When turned on, hidden items in your design are included in the export. Off by default.
- File Name – Set a custom name for the exported file. Defaults to the project name.
Using Bambu Studio
Bambu Studio is a full-featured desktop slicer with advanced print settings and full slicing control. Best for complex prints, custom printer configurations, or when you need fine-tuned control over slicing parameters.
To use Bambu Studio:
- Open your file in Bambu Studio.
- Configure your printer, material, and slicing settings.
- Slice the model and export or send to your printer.