Shapr3D integrates directly with OrcaSlicer, so designs can be sent straight from the Export menu to your slicer without manual file transfers. Slicer (Orca) is compatible with a wide range of FDM printers, making it easy to go from model to print in just a few steps.
Before you begin
To export to OrcaSlicer, make sure you have the following:
- OrcaSlicer installed on your desktop.
Export to OrcaSlicer
- Go to Export and select Slicer (Orca) from the format list.
- Adjust the export settings as needed. See Slicer export settings below.
- Select Open in OrcaSlicer to send the file to the OrcaSlicer desktop app.
Slicer export settings
Before exporting, you can adjust the following settings:
- Resolution – Controls the mesh quality of the exported file. Choose from Low, High, or Custom.
- Include Mesh Bodies – When on, mesh bodies in your design are included in the export. On by default.
- Include Hidden Items – When turned on, hidden items in your design are included in the export. Off by default.
- File Name – Set a custom name for the exported file. Defaults to the project name.
Using OrcaSlicer
OrcaSlicer is a full-featured open-source desktop slicer compatible with a wide range of FDM printers. Best for complex prints, custom printer configurations, or when you need fine-tuned control over slicing parameters.
To use OrcaSlicer:
- Open your file in OrcaSlicer.
- Configure your printer, material, and slicing settings.
- Slice the model and export or send to your printer.